Download Picture 1
Nolato’s injection moulded filler neck hose components combine Viton® fluoroelastomer bonded to ethylene acrylic elastomer for flexibility with impressive durability, and fuel permeation resistance to meet Euro 4, Lev II and PZEV evaporative emissions legislation.
Geneva, Switzerland – 17 August 2007 – Filler neck hoses are key components in the modern automotive fuel system. They must provide a flexible connection between the filler pipe and the fuel tank, strong enough to withstand significant crash impact without fracture and fuel leakage, while providing an impermeable barrier to evaporative emissions in compliance with tough Euro 4 and U.S. Lev II and PZEV requirements.
Traditional practice was to weld a plastic filler pipe directly onto the fuel tank, but this method is less flexible and the pipe is easily detached at impact. Several hose OEMs overcame the problem by developing extrusion moulded rubber hoses, with the inherent no-vibration, interchangeability and adjustability advantages of rubber.
A better way
Nolato Sunne AB , part of the Nolato Group, Sweden, a leading supplier of plastic and rubber products for the automotive industry, devised a better way of manufacturing filler neck hoses to provide flexibility with impressive durability, and fuel permeation resistance to meet Euro 4, Lev II and PZEV evaporative emissions legislation.
The company uses a unique combination of DuPont Performance Elastomers (DPE) Viton® fluoroelastomer (FKM) bonded to ethylene acrylic elastomer (AEM), in an injection moulded construction. Jan Bäckström, Director of Marketing and Sales for Nolato Sunne, explains.
“Nolato’s innovative filler neck hose design consist of two layers — an inner layer of Viton® fluoroelastomer which provides an effective barrier to evaporative fuel emissions, and an outer layer of AEM for stability and ozone resistance. The big challenge in succeeding with this unusual concept was to develop an FKM formula that could run smoothly and consistently while being so strong that it could be overmoulded with another material without being fully cured.”
“DPE worked closely with Nolato to achieve a degree of FKM + AEM chemical bonding that is quite unique. The bond is so strong that the two materials cannot be separated, to the extent that they can be considered as one layer.”
“Also, as an additional advantage, injection moulding enables various diameters in hose ends, and ribs and locating marks to be designed onto the outer surface for secure clamping and precise assembly — unlike featureless extrusion moulded hoses.”
Well proven
Nolato filler neck hose of Viton® and AEM was first commercialized ten years ago, and has been further developed and refined since to meet the latest Euro 4, Lev II and PZEV requirement. Today, the hose is fitted as standard equipment by several leading Tier 1 suppliers for installation in fuel systems for Volvo, Land Rover and Saab models.
Jan Bäckström reports that two additional leading automotive OEMs will shortly adopt the bi-component hoses, with big interest from other OEMs and significant new business potential in the near future. He cites the design freedom of injection moulding and the lifetime fuel and permeation resistance of Viton® as keys to its success.
About DuPont Performance Elastomers
# # #
Note to Editors:
Please mention DuPont Performance Elastomers by its full name in the first reference. For all references thereafter, the company may be cited as DPE.
For more information about Nolato Sunne AB, please contact Jan Bäckström at jan.backstrom@nolato.se or visit http://www.nolato.com/).
DuPont is a trademark of DuPont and its registered affiliates.
Viton® is a registered trademark of DuPont Performance Elastomers.
Reader Enquiries:
DuPont Performance Elastomers S.A.
2, chemin du Pavillon
CH-1218 Le Grand-Saconnex
Geneva , Switzerland
Phone: +41 22 717 4000
Fax: +41 22 717 4001
http://www.dupontelastomers.com
Press Contact/Photographs:
Kellie Nolan
Gibbs & Soell Public Relations
Zurich , Switzerland
Tel: +41 44 205 5565
Fax: +41 44 205 5566
knolan@gibbs-soell.com
01-ELAS-07-EU
